Category Archives: Solenoid pumps

DUPLEX [EN]

SOLENOID PUMPS

Duplex – Solenoid pumps
In brass
Flow rate: 3 to 35 GPH at 60 Hz/10 to 130 l/h at 50 Hz
Pressure: up to 116 psi/up to 8 bar

01-MG200-400

The Duplex solenoid pump is one of a range of solenoid pumps of compact size which embodies design excellence coupled with outstanding performances and reliability.
The Duplex pump designed for pumping liquids, operates on the solenoid principle. Motion occurs when the coil is energized with unidirectional impulses created by an alternating current passing through a diode.
The Duplex pump is brass made with threaded female 1/8” inlet and outlet ports, while the ball valves are in glass/EPDM. The piston working inside a brass tube is in stainless steel. The pump may be mounted in any orientation on shock absorbing supports for the quiter operation.

MAIN APPLICATIONS:
Post mix drink dispensers, Beverage vending machines, Reverse osmosis, Water carbonators, Ultra-filtration

SYRUP [EN]

SOLENOID PUMPS

Syrup – Solenoid pumps
In plastic
Flow rate: 1 to 15 GPH at 60 Hz /5 to 55 l/h at 50 Hz for fluids from 1 to 400 cSt
Pressure: up to 116 psi/up to 8 bar

01-MG200-400

The Syrup version of the Fluid-o-Tech® Mono solenoid pump is equipped with custom components, specifically designed to grant supreme performance and a high degree of compatibility with most of the syrups present in the market today with a viscosity up to 400 cSt.
The innovative sealing system, the new piston highly resistant to corrosion and mechanical wear and the improved precision of the flow regulator make of this pump a remarkable product.
The coil is made of self-extinguishing material with a class H insulation winding. All the models are equipped with a noise suppression device which allows the pump to be installed in all those applications where low noise is a premium. Shock absorbing supports are available for the quietest operation.

MAIN APPLICATIONS:
Post mix drink dispensers

MONO [EN]

SOLENOID PUMPS

Mono – Solenoid pumps
In brass or plastic
Flow rate: 12 to 27 GPH at 60 Hz/40 to 100 l/h at 50 Hz
Pressure: up to 200 psi/up to 14 bar

01-MG200-400

This latest version of the Fluid-o-Tech® Mono solenoid pump has been developed looking at the future. The hydraulic improvements make of this pump the ideal component for all the applications where safety and reliability are necessary elements. The Mono solenoid pump, designed for pumping a range of fluids including potable water, food quality low viscous syrups and semiaggressive fluids at relatively high pressures, is available in brass or plastic housing and fittings, with glass or EPDM check valves and an AISI 430 FR stainless steel piston.
The coil is made of self-extinguishing material with a class H insulation winding. All the models are equipped with a noise suppression device which allows the pump to be installed in all those applications where low noise is a premium. Shock absorbing supports are also available for the quietest operation.

NOTE:
Max system pressure: 18 bar (260 psi), Max temperature: 70 °C (158 F)
MAIN APPLICATIONS:
Espresso coffee machines, Beverage vending machines, Smoke generators, Steam generators, Carpet cleaners, Water purifiers, Water carbonators, Spraying systems